Warp-Drive-Physics.com
See: lightdrive-ascension.com
  • Home
  • Warp Drive News
  • Warp Drive Blog
  • Metaphysics Blog
  • Warp Drive Philosophy
  • Warp Drive Engineering
  • Tesla Engineering Physics
  • Construction
  • Construction Blog
  • Updates and Design Improvements
  • Outer Ring
  • Exo-Archaeoastronomy Blog
  • Planetary News
  • Ascension Blog
  • General Blog
  • Free Energy / Tesla
  • Info

OTC-X1 - Bedini Framework, the MVP Overunity Pulse Motor

7/22/2018

2 Comments

 

This is the secondary power system idea to replace the MEG-based Outer Ring power system for the LAU-X4

​

Overunity energy: 15 times more power output in a device than its input. 50 watts input to about 772.5 watt output.  It's actually doing more, because it's charging its own battery, 10 more batteries, powering two inverters, and a battery charger, and running a load 15 times more output than its measured input, all while showing on the meters that the input battery is still charging to accommodate the load.  

​(The X1 in contrast generates more energy, the more load is applied, in its rotation, one of the characteristics of negative energy is:  more power is generated when a load is drawn.  It's unknown if the MVP will do this, but . . .  it *is* creating more energy than going into the system)

This has now been demonstrated in public, and has been out for a year, created by Leland Williams (AKA Matrix Le).

This has changed the laws of physics as we know them, and it opens the door for the construction of real faster than light spacecraft as the engineering foundation for the famous OTC-X1 engine. Williams' machine even follows similar geometry to the OTC-X1.


The reason why people scoff at overunity is BECAUSE IT REQUIRES THAT ENERGY MUST BE CREATED.

​
You can see this amazing machine, and he has provided the way for the public to build it for themselves. Or course it follows classic Bedini framework, and people can customize it to their needs.
​


Here are the links:

1) https://youtu.be/uG6Brdzq9B4  <--- The most advanced version as of this date, basic diagram seen below

2) https://youtu.be/Q8aGGyKC9Nw

3) https://youtu.be/TioGAPDlIeY

4) https://youtu.be/dY0Avomn4bw

5) https://www.youtube.com/watch?v=ZNQRaj5ddJs <-- the device that originally started it off.




This below is a screenshot of Leland Williams, AKA Matrix Le's MVP pulse motor, with his two custom Bedini circuits and Lenz buster, in an AC configuration.

The reed relay switch is the "Lenz Buster" which overcomes the Lenz effect, creating the powerful amplification effect that his device is known for.



Picture

This is the most advanced and successful Bedini system known to man, and shown to the public.

This is the recommended foundation to be applied to the OTC-X1 engine.  

Click the Links Above !!!!!!!

Picture


​
Tell ya what .. adapting a Bedini/Williams architecture to fit this, is a fun and EXCITING prospect! Not only is it a new type of engine, a mono-polar motor, but with Bedini architecture, it can cycle itself and run for a really long time. Add an electret power source and it will run for hundreds of years nonstop or until the bearings fail.

With MVP architecture (most volts possible, requiring fat coils) then it'll truly give me a decent high voltage power output and an electrostatic rotating field.

 
Those plates are dielectric, and with an electret material in the plates itself, then a high volt applied field based on the electromagnetic collapse (pulse motor; again, Bedini/Williams), then that is working with Tesla's concept of rapid pulses in quick collapse, without driving electrons in the current, but spinning the electrons and rotating them, based on Dr. Ning Li's concept of AC gravity. .... the electret material in between the dielectric plates is where the Bifeld-Brown concept applies.




​

​


​
2 Comments

    LAU  Trust


    ​     5/22/18

    ​
    This section is Current Research.  

    Now that the LAU-X4 is designed, and the OTC-X1 has been understood as using negative energy similar to the MEG, then even though it is relatively inexpensive for basic research into free energy, the Tesla energy system will ultimately produce developmental results to explain the characteristics of negative energy used in warp drive application.






    ​
    ​. . .



    Although I have many links on my home page, and information disclosed on the Tesla engineering page, it is easier to make a separate page with free energy related links and information

    ​

    Archives

    September 2018
    July 2018
    June 2018
    May 2018
    December 2016
    November 2016
    August 2016
    March 2016
    January 2016
    December 2015

    Categories

    All

    RSS Feed

email:  [email protected]
            Creation date: March 15th, 2013
            Common Copyright Pure Trust
            Educational Resource
Proudly powered by Weebly
Photo from Ethan Hein