This is the secondary power system idea to replace the MEG-based Outer Ring power system for the LAU-X4
Overunity energy: 15 times more power output in a device than its input. 50 watts input to about 772.5 watt output. It's actually doing more, because it's charging its own battery, 10 more batteries, powering two inverters, and a battery charger, and running a load 15 times more output than its measured input, all while showing on the meters that the input battery is still charging to accommodate the load.
(The X1 in contrast generates more energy, the more load is applied, in its rotation, one of the characteristics of negative energy is: more power is generated when a load is drawn. It's unknown if the MVP will do this, but . . . it *is* creating more energy than going into the system)
This has now been demonstrated in public, and has been out for a year, created by Leland Williams (AKA Matrix Le).
This has changed the laws of physics as we know them, and it opens the door for the construction of real faster than light spacecraft as the engineering foundation for the famous OTC-X1 engine. Williams' machine even follows similar geometry to the OTC-X1.
The reason why people scoff at overunity is BECAUSE IT REQUIRES THAT ENERGY MUST BE CREATED.
You can see this amazing machine, and he has provided the way for the public to build it for themselves. Or course it follows classic Bedini framework, and people can customize it to their needs.
Here are the links:
1) https://youtu.be/uG6Brdzq9B4 <--- The most advanced version as of this date, basic diagram seen below
5) https://www.youtube.com/watch?v=ZNQRaj5ddJs <-- the device that originally started it off.
This below is a screenshot of Leland Williams, AKA Matrix Le's MVP pulse motor, with his two custom Bedini circuits and Lenz buster, in an AC configuration.
The reed relay switch is the "Lenz Buster" which overcomes the Lenz effect, creating the powerful amplification effect that his device is known for.
This is the most advanced and successful Bedini system known to man, and shown to the public.
This is the recommended foundation to be applied to the OTC-X1 engine.
Click the Links Above !!!!!!!
Tell ya what .. adapting a Bedini/Williams architecture to fit this, is a fun and EXCITING prospect! Not only is it a new type of engine, a mono-polar motor, but with Bedini architecture, it can cycle itself and run for a really long time. Add an electret power source and it will run for hundreds of years nonstop or until the bearings fail.
With MVP architecture (most volts possible, requiring fat coils) then it'll truly give me a decent high voltage power output and an electrostatic rotating field.
Those plates are dielectric, and with an electret material in the plates itself, then a high volt applied field based on the electromagnetic collapse (pulse motor; again, Bedini/Williams), then that is working with Tesla's concept of rapid pulses in quick collapse, without driving electrons in the current, but spinning the electrons and rotating them, based on Dr. Ning Li's concept of AC gravity. .... the electret material in between the dielectric plates is where the Bifeld-Brown concept applies.